The Short Answer
To remove a Holstery holster from a ModSlot, use the down, slide, up method. Press the holster down toward the bottom of the ModSlot, slide it left or right to free the bottom of the clip, then pull it up and out. Pulling straight up won't work, and that's by design: ModSlots are built to keep your holsters locked in place while you work.
The videos below show the full move. Once you've done it a few times, it takes seconds.
Jump to a section
In This Guide
What Are ModSlots?
ModSlots are built-in attachment points that lock a Holstery holster or pouch in one spot. Instead of clipping onto plain webbing, where gear can slide around as you bend and climb, the clip seats into a slot and stays put.
You'll find ModSlots on the ModBelt HD, the ModRig chest rig, the LowBoy panel, the ModPouch line, and the Jolly Roger hammer holster. Every Holstery holster uses the same 1.75" clip, so any holster fits any ModSlot.
Why the tight fit is a good thing:
- No sliding. Your hammer and drill are where your hand expects them, every time.
- Your setup survives the day. Holsters stay in place when you take the belt off and hang it up. One verified buyer noticed it right away: "my stuff doesn't slide around on it when I take it off" (Rob).
- No accidental drops. A holster that's hard to pull off by accident is also hard to knock off on a ladder.
The trade off: because they're built to stay put, ModSlots take a specific move to remove a holster. That's what this guide covers.
How to Remove a Holster from a ModSlot: Step by Step
- Press down. Push the holster down toward the bottom of the ModSlot it's attached to.
- Slide sideways. While holding it down, slide the holster to the left or right. This frees the bottom of the clip from the slot.
- Pull up. Lift the holster up and out of the ModSlot.
To put it back on, slide the clip into the ModSlot from the top and press it down until it seats.
Watch the Video
Here's the down, slide, up method in action.
And a second look at removing holsters:
Tips If It Still Won't Come Off
- Don't pull straight up. The clip is designed to resist that. Always press down first.
- Take the belt off. It's much easier to work the clip with the belt laid flat on a bench or tailgate than while you're wearing it.
- Empty the holster. A drill or hammer in the holster adds weight and makes it harder to slide.
- Expect a snug fit at first. New gear grips tight. Some buyers find standard clips stiffer to remove than Pro versions, which use a spring steel clip. One buyer said "attachments with Non-pro clips are hard to get off the belt…probably not the worst thing though" (Zach N.).
- Don't pry with a tool. If it's stuck, reach out to us instead of forcing it. Every Holstery product is covered by our lifetime repair or replace guarantee.
Planning a new layout? Take the Find My Setup quiz →
ModSlots vs. a Plain Belt: Side by Side
| Clipped to a Plain Belt | Seated in a ModSlot | |
|---|---|---|
| Holds position | Can slide along the belt | Locked in one spot |
| When you take the belt off | Gear can shift around | Setup stays exactly as you left it |
| Removing a holster | Unclip from the belt | Down, slide, up |
| Fits any Holstery holster | Yes, any belt up to 1.75" | Yes |
| Where you'll find it | Any work belt, the ModBelt | ModBelt HD, ModRig, LowBoy, ModPouches, Jolly Roger |
Holstery Gear With ModSlots
Want more places to lock in your holsters? These all have ModSlots built in.
ModRig
A chest rig that holds up to six holsters and pouches and keeps weight off your hips.
Shop now →LowBoy
A clip-on panel with two ModSlots that hangs holsters lower, where your hand naturally falls.
Shop now →ModPouch
A clip-on pouch with ModSlots built in, so holsters mount right on the pouch.
Shop now →ModPouch XL
More room for hand tools, with ModSlots for the holsters you use most.
Shop now →Which ModSlot Setup Is Right for You?
If you want a full belt that locks every holster in place... get the ModBelt HD.
If you'd rather carry tools on your chest... the ModRig holds up to six holsters and pouches and keeps weight off your hips.
If you want holsters to hang lower... clip a LowBoy onto your belt and seat holsters in its two ModSlots.
If you want a pouch and holsters in one spot... a ModPouch lets you slot holsters right into the pouch.
If you swap holsters a lot during the day... consider Pro holsters. Some buyers find their spring steel clips easier to move around.
Our Pick: Holstery ModBelt HD
ModBelt HD | Padded Modular Tool Belt
A padded, 16.2 oz modular tool belt with built-in ModSlots that lock every holster and pouch exactly where you put it, even when the belt comes off.
- Sewn and assembled in Idaho, USA
- Lifetime repair or replace guarantee
- 45-day money back
- Free USA shipping over $99
$135
Shop the ModBelt HD →Want the belt and accessories together? Get the ModBelt HD Starter Kit →
Common Concerns About ModSlots
"Why is it so hard to get a holster off?"
Because it's built not to fall off. The same grip that makes removal take a specific move is what keeps your drill from dropping off a ladder. Use down, slide, up, and it comes right out.
"Will I wear out the clip by moving it a lot?"
Holstery clips are made for repeated use, and every one is covered by our lifetime repair or replace guarantee. If you move holsters around constantly, Pro versions use a spring steel clip.
"Do I need ModSlots, or can I use a regular belt?"
Every Holstery holster clips onto any belt up to 1.75" wide. ModSlots add one thing a plain belt can't: holsters that stay exactly where you put them.
FAQ
How do you remove a holster from a ModSlot?
Press the holster down, slide it left or right to free the bottom of the clip, then pull it up and out.
Why won't my holster pull straight out?
ModSlots are designed to lock holsters in place, so pulling straight up won't release them. Press down and slide first.
Which Holstery products have ModSlots?
The ModBelt HD, ModRig, LowBoy, ModPouch line, and Jolly Roger.
Do all Holstery holsters fit ModSlots?
Yes. Every Holstery holster uses the same 1.75" clip.
What if a holster is stuck or the clip is damaged?
Contact us. Every Holstery product comes with a lifetime repair or replace guarantee.
Build Your Setup
Now that you can move holsters in seconds, set up your belt for each job and change it whenever the work changes.
