Sorry, there are no products in this collection.
Continue browsingWhat materials are used to make this pouch?
1000D ballistic (Cordura) nylon, Kydex holster frame, polycarbonate belt clip, UHWMPE pull cord, and steel hardware w/Loctite.
What are some other cool design features of the Joey Pouch?
High vis yellow interior - Makes it easy to see your fasteners inside.
One-handed top closure - Cinch Joey shut with one hand if you're in a tight spot.
Replaceable belt clip - Change the clip size or replace a broken clip. (If it happens we'll send you a replacement free of charge)
Elastic side loops - Holds your pencils, pens, markers, tools, and knives.
What size belt does Joey Pouch fit on?
Joey comes with 1.75 Inch clip for belt sizes up to 1.75" (45mm).
Joey pouch can also be clipped on the edge of pants, pockets, or other bags.
Does Build-A-Kit come with a belt?
No, but you can purchase our Modbelt separately, or check out our Build-A-Belt. Modbelt and ModBelt Pro are made specifically to carry our tool holsters!
Are these tool holsters durable?
Yes, they are made from Kydex, steel rivets, and have a strong polycarbonate clip. If a clip breaks you can easily swap it out with the included spare. Clips rarely break but it happens. Contact us for a free replacement if needed. Looking for ultimate durability? Check out our PRO-KIT.
How is Joey Pouch Pro different from the original Joey Pouch?
Joey Pouch Pro has been completely redesigned.
- More structure! We've added an exoskeleton and a flat bottom so it will stand up on its own.
- More durable! A milled aluminum backer and a spring-steel clip.
- U.H.W.M.P.E. lining on the bottom for cut and puncture resistance.
- Slightly larger elastic loops to accommodate markers and screwdrivers. 2x loops on each side.
- Dogbone to reinforce the belt clip.
How is Joey Pouch Pro different from Big Joey?
Big Joey is a larger version of Joey Pouch Pro.
How is the Big Joey different from the original Joey Pouch?
The Big Joey has been completely redesigned.
- More structure! We've added an exoskeleton and a flat bottom so it will stand up on its own.
- More durable! A milled aluminum backer and a spring-steel clip.
- U.H.W.M.P.E. lining on the bottom for cut and puncture resistance.
- Slightly larger elastic loops to accommodate markers and screwdrivers. 2x loops on each side.
- Dogbone to reinforce the belt clip.
How is Big Joey different from the Joey Pro?
Big Joey is a larger version of Joey Pouch Pro.
What size belt does Big Joey Pouch fit on?
Big Joey comes with a 1.75" Inch (45mm) belt clip. Big Joey pouch can also be clipped on the edge of pants, pockets, or other bags.
What about XL 2.25" clips?
We're not offering XL Big Joey clips at this time.
How is Pro different from the original?
MagMaster Pro has the same magnetic strength as the original. But the back plate and belt clip are now metal for better performance and durability. The magnet is still cased in a hard rubber/plastic cap to grip and protect your tools.
- Milled aluminum backer for a lifetime of hard use.
- A low-profile spring steel belt clip that never quits.
What materials are used to build MagMaster Pro?
Milled aluminum frame, Neodymium N52 magnet cased in a TPU (hard rubbery plastic) cap, and a steel spring belt clip.
What size belts will MagMaster Pro fit on?
The MagMaster Pro belt clip fits belts up to 1.75" (45mm) wide
Will MagMaster wipe my phone?
Modern Smartphones have solid-state memory that is not affected by magnets. The compass in some phones could be affected when the magnet is pressed against it. If this is a concern for you we recommend you simply don’t keep your magnet and phone in direct continuous contact (like in the same pocket).
Will MagMaster destroy my credit cards?
If you rub the magnet directly on the magnetic credit card stripes you could damage your cards. Avoid putting the magnet in the same pocket as your wallet.
What if my MagMaster collects metal debris/dust?
MagMaster will collect metal dust. Some people use it specifically for this when cleaning up. Metal dust can be blown off with an air compressor, wiped off with a rag, or removed with duck tape.
"My one concern as a welder is the metal shavings it would pick up, but once every couple of days a quick blow-off with the air hose cleans it perfectly." -Wyatt M.
Will MagMaster scuff my tools?
MagMaster has a hard rubber cover to protect the magnet and your tools. Under regular use, you’re unlikely to get any scuff marks.
Can I use MagMaster while working overhead?
MagMaster is an extremely strong magnet but it is not an active retention device, meaning it may release objects. Please use caution and commonsense especially when carrying heavy tools and working overhead.
Tell me more about this super magnet?
There are other belt magnets out there, but we went to great lengths to find a massive N52 Neodynmium magnet that's 3/16in thick and over an inch in diameter. It's backed up by a solid steel plate to focus the magnetic power so that the rated pulling power for this thing is around 7+lbs. It can easily hold a large pipe wrench or a 22oz framing hammer.
What is MagMaster made from?
Kydex holster frame, N52 neodymium magnet, TPU magnet cover, polycarbonate belt clip, and steel hardware w/loctite.
Will MagMaster wipe my phone?
Modern Smartphones have solid-state memory that is not affected by magnets. The compass in some phones could be affected when the magnet is pressed against it. If this is a concern for you we recommend you simply don’t keep your magnet and phone in direct continuous contact (like in the same pocket).
Will MagMaster destroy my credit cards?
Possibly if you rub the magnet directly on the magnetic credit card stripes. Avoid this and you’ll be fine. There’s no evidence that it affects chips which most cards use now anyways.
Will I stick to metal on the job site?
Yes. MagMaster is strong. If you brush too closely on metal material you will stick to it. The magnetic pull range is at its strongest 1-2 inches from the surface so it’s avoidable. Most people clip it in a position where it’s less likely to stick while they work and find that the convenience of using MagMaster greatly outweighs the inconvenience of occasionally sticking to a metallic surface. We recommend you exercise caution if you work around automobiles.
What if my MagMaster collects metal debris/dust?
MagMaster will collect metal dust. Some people use it specifically for this when cleaning up. Metal dust can be blown off with an air compressor or wiped off with a rag.
"My one concern as a welder is the metal shavings it would pick up, but once every couple of days a quick blow-off with the air hose cleans it perfectly." -Wyatt M.
Will this scuff my tools?
MagMaster has a hard plastic cover to protect the magnet and your tools. Under regular use, you’re unlikely to get any scuff marks.
Is this safe to use with battery-powered tools like a drill?
Yes, but we have a better way to carry a drill.
Can I use MagMaster while working overhead?
MagMaster is an extremely strong magnet but it is not an active retention device, meaning it may release heavy objects. Please use caution and commonsense especially when retaining heavy tools and while working overhead. Always tether!
Tell me more about this super magnet?
There are other belt magnets out there, but we went to great lengths to find a massive N52 Neodynmium magnet that's 3/16in thick and over an inch in diameter. It's backed up by a solid steel plate to focus the magnetic power so that the rated pulling power for this thing is around 10 lbs. It can easily hold a large pipe wrench or a 22oz framing hammer.
If you're in between sizes or on the edge, order one size up.
If you're not in the U.S., or you're unsure what size to order, measure your waist and order based on actual length.
Buy Direct From Us
- Free shipping on U.S. orders!
- Most orders ship same day. Mon-Fri before 1pm PST.)
- Take advantage of our Buy 3 Get 1 Free Build-A-Kit deal!
- You'll receive an order confirmation when your order is made and a shipping confirmation when your item(s) have shipped. Please allow up to 48 hours for tracking to work.
Buy with Amazon Prime Button
- Available to Amazon Prime members in U.S.A.
- Ships from an Amazon warehouse.
- Purchase one item at a time with the BWP button.
- Does not work with discount codes.
U.S.A. Orders
- Free shipping on U.S. orders!
- Expedited shipping available on select orders.
International Orders
- Free International DDP shipping on orders over $125 USD.
- Standard International DDP. Duties and taxes are included in your shipping cost calculated at checkout. (10-30 days)
- Expedited Shipping from UPS worldwide (cost calculated at checkout). Duties and taxes are the customer's responsibility. (7-10 days)
Have any questions about your order? Contact us support@holstery.com or call 208-301-6090 M-F 9-5pm PST.
We're committed to making it right.
If our products don’t work for you in the first 45 days...
We'll give you a full refund.
If our products break or have any defects…
We repair or replace for life.
If you need to make an exchange…
Let us know and we’ll work with you to get you the right size.
If you have any problems at all - my team and I will do whatever we need to do to make it right.
-Josh Hartung
Founder & CEO
support@holstery.com
208-301-6090
At Holstery we know you want to work light and fast.
The problem with working with tools? Carrying them.
Tool belts suck.
They’re big, bulky, and rarely organized for the way you work. They don’t scale up or down to meet the task at hand.They limit mobility and leave you feeling more drained at the end of the day.
Pants pockets aren’t much better.
We build lightweight and modular tool carry systems to help you:
- Customize your tool carry. Carry only the tools you need, where you want them.
- Lighten your load. Gear up or down to meet the demands of the task at hand.
- Minimize bulk. Low-profile for tight interiors and busy professional environments.
We're all about continuous improvement!
Our products are designed and assembled in our shop in Moscow Idaho, USA.
We practice a lean manufacturing philosophy which means:
- Developing our people is first and foremost.
- Continuous improvement to our process and ourselves (kaizen).
- One piece production flow (almost no finished inventory).
- Quality assurance is everyone's responsibility.
- We're always looking for ways to reduce waste (overproduction, waiting, transport, excess inventory, motion, defects, people potential).
FAQ
Are you an Australian company?
No, but we love kangaroos! They have built in tool pouches and they’re light on their feet!
Where are you located?
We’re located at 1500 Levick St. in Moscow Idaho, USA.
Who started Holstery?
After years of working in trades Josh Hartung went back to school to get his engineering degree at U of Idaho and started an autonomous car company. After living in Portland for several years he returned back to Moscow and started Holstery in his garage with a tabletop CNC.
What are you doing right now?
This week we’re working hard on building gear in our shop, shipping out orders, and working on designing new products. We currently have 5 new products in development!